Monday, September 18, 2006

From the ground up nickel and stainless steel markets are poised to improve, although the aerospace sector is still slumping

Nickel markets should hold up fairly well over the next 12 months thanks to a careful balance between supply and demand. Stainless and nickel's steadily improving performance should continue over the next year, especially if many manufacturing segments begin to improve. However, continuing problems in the aerospace industry concern many vendors.

GROUNDED

During the Institute of Scrap Recycling Industries Inc.'s (ISRI) Nickel/ Stainless Roundtable, held this fall in Pittsburgh, several speakers noted continuing problems with the aerospace industry are putting downward pressure on markets. Ed Newman, vice president of Keywell LLC, Pittsburgh, rattled off a list of stories that highlight the difficult situation.

"When we look at today's business picture we can somewhat understand how hard it can be to be an optimist in a pessimistic time," said Newman. "Honestly, it was hard to find a bright spot," he noted in regard to the headlines. "Boeing delivered 527 airplanes in 2001. This year they expect to deliver 380, a drop of almost 30 percent. Next year they project to deliver between 275 and 300 airplanes--another 25 percent drop. They have let nearly 30,000 workers go to date.

"American Airlines announced in August that it is retiring another 74 airplanes and is deferring delivery on 35 new planes that they had planned to take delivery of this year. They also plan another 7,000 layoffs. US Air is in Chapter 11, and there are reports that United might not be far behind," he added.

Newman continued by noting that General Electric, the world's largest maker of jet engines, expects engine deliveries to fall 15 percent to 20 percent this year and a similar amount next year.

STAYING STEADY

Even with such a bleak forecast for one of the main end markets for the specialty grades of nickel and stainless steel, many handlers of the metal have seen steadily improving prices. The main reason for the improved pricing is nickel's balance between supply and demand.

During the ISRI meeting, Yuri Sobolev, senior vice president of Norimet-Norilsk Nickel, the large Russian mining concern, noted that his company has taken a significant amount of production off line. This move reverses an earlier trend when Russian metals producers were accused of dumping their commodities on the world market, resulting in much lower prices.

Several scrap nickel handlers note that Norilsk has a large block of nickel warehoused at the port of Rotterdam, Netherlands, as collateral for loans. This move has tightened supply and demand for the material.

It is not likely that this nickel will be placed on the open market until prices climb much higher, according to Patricia Mohr with Scotia Bank, an investment company that tracks commodity markets.

The lack of available scrap nickel is not limited to the U.S. Reports indicate that scrap nickel supplies are limited in Europe and Asia as well. The result has improved the overall pricing environment for the metal.

"Western World stainless steel production will rise by almost 5 percent in 2002, after last year's inventory correction," says Mohr. "Though global stainless steel output may falter temporarily in the fourth quarter, the impact on primary nickel demand will be limited by tight scrap supplies."

In its October meeting the International Nickel Study Group (INSG) reported that nickel production and consumption should end up sharply higher this year. For 2002 the group forecasts that world primary nickel production should increase by around 3.6 percent, with production in the West increasing by 4.6 percent. The INSG is an autonomous, intergovernmental organization whose members are comprised of nickel producing, consuming and trading countries.

The INSG also expects nickel production to grow by 3.5 percent next year, with production in the West climbing by 4.7 percent.

While production should show some promise, nickel consumption should increase by 5.4 percent in 2002 and by 6.6 percent next year.

With the conflicting information for the nickel market, it is no surprise that the overall trend is pointing upward. Despite the recession in the manufacturing segment over the past two years, the strength in consumer purchases has helped prop up prices for nickel over the past several quarters. With the expectation that the manufacturing segment will start to turnaround, the feeling is that prices, after a temporary lull leading into early 2003, should begin improving.

While long term the fundamentals look good for stainless, short term the market for scrap nickel will fluctuate significantly.

Al Goodman, a trader with ELG Metals, Chicago, says that nickel is a thinly traded commodity, making it more volatile.

While volatility makes it difficult to predict market conditions for nickel and stainless in the short term, the two metals show a definite growth pattern. Goodman notes that China is a strong end market. As China seeks to modernize, growth in demand for nickel, stainless steel and other metals will continue to outpace demand in the U.S.